Project Scope

The works at Queens Park Primary School included:

• Automation of the existing vehicle entrance gates
• Controlled operation of the existing pedestrian gate
• Installation of Paxton Net2 access control
• Installation of Videx intercom systems
• Installation of dedicated electrical supplies
• Vehicle induction loop exit control
• Override controls for the vehicle and pedestrian entrances
• Installation and commissioning of the associated gate control equipment

Automatic Vehicle Gates

The vehicle entrance was designed to allow vehicles to enter the school grounds and clear the main road before requesting access.

The existing gates were automated using two FAAC 400 CBAC automatic gate operators, controlled by a FAAC 455D control panel.

Staff access through the vehicle entrance was managed using the Paxton Net2 access control system, while visitors and deliveries could request entry through the installed Videx intercom system monitored from the school reception.

Exit from the secure side of the vehicle gates was controlled using vehicle induction loops installed within the school grounds.

An override key switch was also incorporated into the system to allow authorised manual control when required.

A dedicated 240V electrical supply was installed for the gate equipment, while a Ritherdon enclosure was used to house the associated control equipment locally to the entrance.

Controlled Pedestrian Entrance

As part of the overall access strategy, pedestrians were separated from the automated vehicle entrance and directed towards a dedicated pedestrian gate.

The pedestrian entrance incorporated Paxton Net2 access control, allowing authorised staff to gain entry using the school’s access control system.

Visitors could request access using the installed Videx intercom, with calls monitored by school reception.

Exit from the secure side was provided by a weather-resistant exit button mounted on a high-visibility pedestal.

An override key switch was also installed to provide authorised manual control of the pedestrian entrance when necessary.

Safer School Access

Separating pedestrian and vehicle access was an important part of the project design.

By directing foot traffic towards a dedicated pedestrian entrance, the installation reduced the need for pedestrians to use the automated vehicle gateway and created a clearer access arrangement for pupils, staff, visitors and deliveries.

The combination of FAAC automatic gate equipment, Paxton Net2 access control and intercom communication provided Queens Park Primary School with a secure and manageable entrance system suited to the operational requirements of a busy school environment.

At the time of the installation, Mere UK carried out its automatic gate works in accordance with the relevant machinery and powered-gate safety requirements applicable to the project, including standards relating to safe operation, testing and safety-edge systems.